Product Description-----------------------------------------------------------------------------------------------------------------------------------------------------------
FDXLTER1930 FD Thermistor Replacement for Hayward Pool Heater is a water temperature sensor that plays a crucial role in maintaining and regulating the water temperature within the pool heater.
Features Of FDXLTER1930 Temperature Sensor
1. Temperature Sensing: The FDXLTER1930 thermistor serves as a temperature sensor, responsible for measuring the water temperature within the pool heater.
2. NTC (Negative Temperature Coefficient): Like most thermistors used in pool heaters, the FDXLTER1930 is an NTC type, meaning its resistance decreases as the temperature increases.
3. Mounting: The thermistor is typically installed within the pool heater's water manifold, where it can accurately sense the water temperature.
4. Compatibility: The sensor is specifically designed for use in the Hayward H-Series Low NOx Pool Heater Models. It is important to use the correct thermistor model to ensure proper compatibility and accurate temperature readings.
5. Sensitivity: The thermistor is designed to be sensitive to temperature changes, allowing the pool heater to respond promptly and maintain a consistent water temperature.
6. Durability And Reliability: As a critical component of the pool heater's temperature control system, the FDXLTER1930 thermistor is engineered to be durable and reliable, withstanding the conditions within a pool heater.
Product Parameter------------------------------------------------------------------------------------------------------------------------------------------------------------
| Item number: |
FD Thermistor Replacement for Hayward Pool Heater |
| Part No: |
FDXLTER1930 |
Country of Origin: |
China |
| Probe: |
Stainless Steel |
Type: |
Screw Type |
| Wire Color: |
Black And Red |
Wire Length: |
59.44 inch |
| Fits for: |
For H-Series Low Nox Pool Heater Models h150fdn/fdp, h200fdn/ fdp, h250fdn/fdp, h30fdn/fdp, h350fdn/fdp, h400fdn/fdp |
Product Details---------------------------------------------------------------------------------------------------------------------------------------------------------------------
Thermistor Dimension:
1. Cable length is 59.44 inch or 151cm.
2. The plug width is 8.41 in or 1.05cm.
3. Screw length is 1.92 in or 4.9cm. Diameter is 0.62in / 1.6 cm and 0.31in / 0.8cm.
FDXLTER1930 Replacement For Hayward Universal H-Series Low Nox Pool Heater Models:
| h150fdn |
h150fdp |
h200fdn |
h200fdp |
| h250fdn |
h250fdp |
h300fdn |
h300fdp |
| h350fdn |
h350fdp |
h400fdn |
h400fdp |
Notice:
1. Please check the user manual for your Hayward heater to ensure FDXLTER1930 is listed as the part number for the temperature sensor/thermistor.
2. After you replace the temperature sensor with a new one, if the temperature reading is not accurate, check the resistance value at the given temperature provided in the Hayward heater user manual, if it is within 10% of the value shown, it is probably not a faulty temperature sensor. It may be the control board or another problem.
Advantages Of FD Thermistor Replacement For Hayward Pool Heater:
1. High-Quality Material: Thermistor sensor is made of semiconductor material, which has undergone strict quality inspection, with excellent quality and stable performance, and can feel extremely small temperature changes. The sensor is inside an anti-oxidation and corrosion resistant stainless steel housing.
2. Easy to Replace: The FD Thermistor Replacement is very easy to replace. 3/4 inch or 19mm open end wrench and 10 minutes of time. Be careful not to over tighten. Leave about 2 threads still showing.
3. The connection between the wire and the sensor is firm and durable.
4. Protective sealing: water cannot penetrate inside the sensor to ensure high quality and reliability.
5. Stably sense extremely small temperature changes, ensuring that the heater can provide sufficient heat to maintain the water temperature.
6. Service: We provide friendly service, if you have any questions about thermistor sensor, please feel free to leave us a message, we will reply you within 12 hours
How to Install-------------------------------------------------------------------------------------------------------------------------------------------------------------------------
1. Locate the Thermistor: The thermistor (FDXLTER1930) is located on the pool heater's water manifold. The number of thermistors and their positions may vary depending on your specific model.
2. Access the Thermistor: If necessary, remove any covers or panels that may be obstructing access to the thermistor. Use a screwdriver or nut driver to remove the fasteners and open up the heater's casing, exposing the thermistor.
3. Disconnect Wires: Gently disconnect the wires connected to the existing thermistor. Take note of how the wires are connected to the thermistor for easy reinstallation later.
4. Remove the Old Thermistor: Carefully remove the old thermistor from its mounting location. It may be secured with a bracket or held in place with a retaining clip.
5. Install the New Thermistor: Take the new FDXLTER1930 thermistor and place it in the same position where the old one was located. Secure it with the mounting bracket or retaining clip, if applicable.
6. Connect Wires to the New Thermistor: Attach the wires to the new thermistor in the same manner they were connected to the old one.
7. Reassemble the Heater: Put back any covers or panels that were removed to access the thermistor. Use the screwdriver or nut driver to fasten them securely.
8. Test the Heater: After the replacement, reconnect the pool heater to the power supply and turn it on. Verify that the heater is now reading the water temperature accurately. Monitor its performance to ensure everything is functioning correctly.
Factory Tour---------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Dongguan Tianrui Electronic Co., Ltd. was established in 2000. Our factory covers an area of 4000 square meters with a monthly production capacity of 50 million pieces. We are committed to becoming a comprehensive circuit protection component manufacturer and solution supplier.
We are specialized in over current protection, over temperature protection, over voltage protection design, development, production and sales. Products are widely used in consumer electronics, automobiles, ships, communications, power supplies, power tools, new energy and other fields.
With variety of advanced manufacturing and testing equipment, we adopt perfect quality management system to ensure that every single piece of our components are safe and stable. Our operations are ISO9001:2000-certified and products meet international standards.
Our Advantage
1. Price Advantage: We have a strong supplier net to offer raw materials with competetive price and the supply is stable. We design and build our own molds for production. All these make our price advantage.
2. Good Quality: we adpot excellent quality management system to ensure that every single piece of our components and products are safe and stable.
3. Factory Wholesale: We have open stock for standard product in warehouse. So we can finish order in a short lead time and make fast delivery.
4. One-stop Service: We have R&D, QA, sales and after-sales team to offer you a full service including selection recommendation, technical support, after-sales protection.
Exhibition-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Contact info--------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Cherry Leung
Phone: +86 13713428909
Audited Supplier 
){kind=link}
){kind=link}