Raypak Replacement 009577F 100K Ohms Temperature Sensor 336A 337A 406A 407A 3 Wires Compatible with Pool Heaters Spa
Raypak Replacement 009577F 100K Ohms Temperature Sensor 336A 337A 406A 407A 3 Wires Compatible with Pool Heaters Spa
•HIGH SENSITIVITY
•HIGH RELIABILITY
•HIGH PRECISION
•QUICK RESPONSE
-Applied to water heater, wall stove, ice crusher, baker, oven, microwave, deep fryer, boiler, water heating, etc.
This is a replacement Raypak 3-Wire Temperature Sensor. This item is designed to fit Raypak pool heater models such as the 206A; 266A; 336A; 406A Digital Atmospheric; 207A; 267A; 337A; 407A Digital Low NOx IID Pool Heater.
Temperature Sensor Importance: Pool spa temperature sensor is one of the components of the pool heater, plays an important role in ensuring the normal work of the heater and the use of pool water temperature appropriate.
Free Temperature Control: Replace old 009577F pool temperature sensor that fail or are not sensitive, so your pool heater is always working and your outdoor pool or spa is no longer subject to changing conditions and harsh winter climates, giving you the freedom to control your swimming season.
009577F temperature sensor for raypak compatible with the following models
*Compatible with Raypak / Rheem Above Ground Heaters:
P-R156A-AN-C, P-R156A-AP-C
*Compatible with Raypak / Rheem Digital Heaters, Electronic Ignition:
P-R206A-EN-C, P-R206A-EP-C, P-R266A-EN-C, P-R266A-EP-C, P-R336A-EN-C, P-R336A-EP-C, P-R406A-EN-C, P-R406A-EP-C
*Compatible with Raypak / Rheem Digital Heaters, Electronic, Salt Water:
P-R206A-EN-X, P-R206A-EP-X, P-R266A-EN-X, P-R266A-EP-X, P-R336A-EN-X, P-R336A-EP-X, P-R406A-EN-X, P-R406A-EP-X
*Compatible with Raypak / Rheem Digital Low NOx:
Q-R207AL-EN-C, P-R267AL-EN-C, P-R337AL-EN-C, P-R407AL-EN-C
Used On Of The NTC 100K Temperature Sensor
Raypak R206A Digital Heaters
Raypak R266A Digital Heaters
Raypak R336A Digital Heaters
Raypak R406A Digital Heaters
Raypak Model 156A Heaters
Raypak Model R185B Digital Heaters
Raypak Model R265B Digital Heaters
Raypak Model R335B Digital Heaters
Raypak Model R405B Digital Heaters
Raypak Model R207A Digital Low NOx Heaters
Raypak Model R267A Digital Low NOx Heaters
Raypak Model R337A Digital Low NOx Heaters
Raypak Model R407A Digital Low NOx Heaters
Related Part Schematics Of The NTC 100K Temperature Sensor
Raypak 156A Pool and Spa Heater Parts (Raypak, Raytherm, Ruud) (64 parts)
Raypak 206A Heater Parts (Digital Atmospheric Heater Raypak, Rheem, Ruud) (138 parts)
Raypak 207A Heater Parts (Low Nox Raypak, Rheem, Ruud) (114 parts)
Raypak 266A Heater Parts (Digital Atmospheric Heater Raypak, Rheem, Ruud) (139 parts)
Raypak 267A Heater Parts (Low Nox Raypak, Rheem, Ruud) (115 parts)
Raypak 336A Heater Parts (Digital Atmospheric Heater Raypak, Rheem, Ruud) (135 parts)
Raypak 406A Heater Parts (Digital Atmospheric Heater Raypak, Rheem, Ruud) (138 parts)
Raypak Commercial 259 Heater Parts (84 Professional Gas Low Nox) (97 parts)
Raypak Commercial 268 Heater Parts (Professional Atmospheric Heater) (74 parts)
Raypak Commercial 408 Heater Parts (Professional Atmospheric Heater) (74 parts)
Raypak Commercial 409 Heater Parts (84 Professional Gas Low Nox) (101 parts)
Raypak R185B Heater Parts (RP2100) (117 parts)
Raypak R265B Heater Parts (RP2100) (116 parts)
Raypak R335B Heater Parts (RP2100) (117 parts)
Raypak R405B Heater Parts (RP2100) (115 parts)
Raypak Replacement 009577F 100K Ohms Temperature Sensor 336A 337A 406A 407A 3 Wires Compatible with Pool Heaters Spa
|
Product Name
|
RTD Waterproof BBQ Temperature Sensor Probe
|
|
Replacement For
|
Pit Boss Meat Probe Pellet Grills And Pellet Smokers Parts
|
|
Compatible With
|
Pit Boss P7 Series Wood Pellet Grills BBQ PB-39P350
|
|
RTDReplacement Parts
|
RTD Temperature Probe Sensor Grill
|
|
Ressitance
|
|
|
Probe Diameter
|
|
|
Probe Length
|
|
|
Cable Length
|
|
|
Probe/Cable Material
|
Stainless Steel Braided Wire
|
|
Probe Type
|
|
|
Plug
|
|
|
Temperature Range
|
|
|
Features
|
High accuracy/High reliability/Fast Response/Stable Performance
|
|
Certification
|
|
|
Application
|
|
MEAT PROBE REPLACEMENT FOR PIT BOSS MODELS:
Austin XL Pellet Grill
3 Series Vertical Smoker
1000 Nascar
1000 Traditions
1000 Traditions 2
1000SC, Classic
KC Combo
Lexington
5 Series Vertical Smoker
Pro Series 820
Pro Series 1100
Pro Series 1100 Combo
Ranch Hand, Rancher XL
Tailgater, Whiskey Still
7 Series Vertical Smoker
440 Nascar
700 Nascar
Pool temperature sensor features
Prompt the pool heater to turn on or off to prevent overheating of important components. Make sure the heater is working properly to make the pool water more comfortable. Better maintenance of the heater, providing consistent and reliable performance.
- Pool Temperature Sensor
- Reads pool water temperature
- Leads and signals the pool heater to turn on or off
- Prevents vital components from overheating due to excessive operation
- Replaces temperature sensor that has been damaged, corroded, or failed
Solve the following problems
1. Swimming heater not working 2. Abnormal swimming pool temperature 3. The original resistor temperature sensor has been aged, corroded or damaged 4. The heater cannot read the correct temperature 5. The heater cannot be heated to the specified temperature 6. When the pool water temperature sensor fails or stops working, the pool heater will not work properly and there may be problems with the pool heater running above the desired temperature or not running the heater at all
EASY TOINSTALL
No tools required - easily install your own parts and quickly get your pool heater working in minutes.
TIP
1. Please check the user manual for your Raypak heater to ensure 009577F is listed as the part number for the temperature sensor/thermistor.
2. After you replace the temperature sensor with a new one, if the temperature reading is not accurate, check the resistance value at the given temperature provided in the Raypak heater user manual, if it is within 10% of the value shown, it is probably not a faulty temperature sensor. It may be the control board or another problem.
3. Please check the user manual for your Raypak heater to ensure 009577F is listed as the part number for the temperature sensor/thermistor. After you replace the temperature sensor with a new one, if the temperature reading is not accurate, check the resistance value at the given temperature provided in the Raypak heater user manual, if it is within 10% of the value shown, it is probably not a faulty temperature sensor. It may be the control board or another problem.
The Product Size of RTD Pit Boss Series Pellet Grill and Smoker 3.5 mm Plug Waterproof BBQ Temperature Digital Control Meat Probe Clips Grommets Accessories by 304 Stainless Steel for Outdoor Barbecue Roast Steak Cooking Grill Oven Baking Roast
The Feature of RTD Pit Boss Series Pellet Grill and Smoker 3.5 mm Plug Waterproof BBQ Temperature Digital Control Meat Probe Clips Grommets Accessories by 304 Stainless Steel
Pool Temperature Sensor: The pool temperature sensor reads the temperature of the pool water. Guides the pool heater, prompts the pool heater to turn on or off, and prevents vital components from overheating due to excessive operation, which can damage parts.
Compatibility&Replacement Device Model: 009577F Raypak Temperature Sensor Compatible with raypak Heaters 206A, 207A, 266A, 267A, 336A, 337A, 406A, 407A, etc.
Fixing&Repair fault: 009577F Raypak temperature sensor fixed a series of problems such as raypak heater not heating, abnormal temperature and not heating to the specified temperature correctly, temperature sensor aging. No tools required - easily install your own parts and quickly get your pool heater working in minutes.
Ideal Replacemen: 1x Brand New 009577F Raypak Temperature Sensor, Match the original, it is a plug-in replacement that installs and works like a factory part.
100% Quality Guarantee: More than OEM quality at half the price. Well designed and well machined. Made of highly durable materials that have been rigorously tested. Non-OEM parts, but meet OEM manufacturing requirements. Easy to install, saving time and money. This is the manufacturer's replacement. Functionally equivalent to the previous widget.
Easy to install&Plug and Play: The 009577F pool water temperature sensor replacement for Raypak is one of the pool heater parts. No tools are required for the installation of the pool heater temperature sensor, easily install your own parts and quickly get your pool heater running in minutes. Saving time and money.
Application:
The Thermistor temperature sensor is made of food grade 304 stainless steel housing , stainless steel braided cable , 3.5mm plug and sensing element can be thermistor or RTD according to actual environments, it can be waterproof, meat probe , high accuracy, wide operating temperature range , widely used for grill, BBQ, stove, smoker, indoor barbecue, outdoor barbecue, roast steak, cooking, grill, oven, baking, roast, outdoor party, etc. garden outdoor camp with high temperature and high accuracy requirements. The food grade stainless steel probe also can be used for all meat, vegetables, desserts and other foods, monitor the meat temperature or ambient temperature (smoker/grill).
Audited Supplier 
){kind=link}
){kind=link}