| Customization: | Available |
|---|---|
| Breaking Capacity: | Low |
| Type: | Thermal Switch |
|
Still deciding? Get samples of US$ 0.2/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Product | Thermal Switch, Thermal Portector, Thermostat |
| Rated Current | 7A -10A |
| Voltage | 7A/250Vac, 10A/125Vac |
| Shell | Plastic |
| Action Temperature | 45C-150C |
| Package | 1000PCS/ Bag |
YS11 Temperature Thermal Protector
Temperature : 45C-150C
Specification: 7A/250Vac, 10A/125Vac
6A/24Vdc, 15A/18Vdc
2A/250Vac
Features:
YS11 was developed to protect people and property from accidents occurring on Motor which is used for Fan motor, washing machine and so on. It functions as a selfresetting thermal cut-out (Type 2B), thermal motor protector (Type 3C) and thermal protector for ballasts. The YS11 pursued to enable to be used for both of installation manner of on-winding and outside of resin packed motor by clamping or insertion. It directly cut off power line. Since it has plastic case, it does not need to insulate YS11 protector from metal parts of motor.
Construction:
YS11 is constructed with simple design and based on the well known thermostat technology of Sensata Technologies. And it has enough sealing capability to withstand varnish process and reinforced case enabled to be laced on winding. 7.Movable Arm carries current from 1.Lead to 9.Lower Terminal which is insert molded in 6.Lower Block, via 10.Movable Contact and Stationary Contact. 7.Movable Arm, 8.Bimetal Disc and 5.Upper Plate are riveted to secure with 6.Lower Block by 4.Eyelet. This assembly is inserted into 3.Case, and potting Epoxy to seal. Since trip time to cut off the power is depending on the operation temperature of YS11 protector. Rating should be selected properly. With referring Performance curve, it can be enabled to select best one which is matching with Motor.
Application Notes:
R-type case was developed for Resin Packed Motor. This is designed to resist for high pressure which may be loaded during molding process. Maximum pressure is required to be control within 7.5Mpa. Please be noted that R-type case does not have enough sealing capability, therefore it should not applied for winding varnish process. Dimension is 6.0mm x 7.8mm (ellipse) x 23.0mm length.
Dongguan Tianrui Electronics Co., Ltd is one of the most professional circuit protection components manufacturers and programme suppliers in China for about 10 years. Our products are widely used for the household electric appliances and auto industry. Our team will serve for you from the beginning of your source to the very end of the shipment. We are exporter based on factory so that the cost can be saved directly for you .
){kind=link}