R0456500 Regular Temperature Probe Thermistor Sensor Replacement Compatible with Jandy Zodiac Legacy Lxi Pool SPA Heaters

• Customization: Available
• Contact: Contact
• Output Signal Type: Analog Type
• Model NO.: R0456500
• Production Process: Normal Wirewound
• IP Rating: IP67
• Certification: RoHS
• Customized: Customized
• Product Name: R0456500 Sensor Compatible with Legacy Lxi
• Fit: Zodiac R0456500
• Parts Included: Sleeve and Gasket
• Shape: Tube Type
• Housing Material: Plastic
• Wire Length: 3.5 Meter
• Wire Color: Black
• Replace Part Number: R0456500, 6204-209
• Feature: High Reliability
• Application: Compatible with Hayward Pool SPA Heater
• Transport Package: 1000PCS/Package
• Specification: Customized
• Trademark: Tianrui
• Origin: China
• HS Code: 8409999990
• Production Capacity: 5000000

Product Description

The Description of R0456500 Regular 3.5M Hot Tub Temperature Probe Thermistor Sensor 20KOHM Replacement Compatible with Jandy Zodiac Legacy LXi Pool Spa Heaters

R0456500 Regular 3.5M Hot Tub Temperature Probe Thermistor Sensor 20KOHM Replacement Compatible with Jandy Zodiac Legacy LXi Pool Spa Heaters

•HIGH SENSITIVITY
•HIGH RELIABILITY
•HIGH PRECISION
•QUICK RESPONSE

-Applied to  water heater, wall stove, ice crusher, baker, oven, microwave, deep fryer, boiler, water heating, etc.

This regular temperature sensor is designed to use with Zodiac Jandy Legacy LRZE, LRZM pool and spa heater models 125, 175, 250, 325, 400 and also compatible with Zodiac Jandy LXi Low NOx pool and spa heater models 250, 300, 400. Includes sleeve and gasket.

COMPATIBLE WITH THE FOLLOWING BRANDS
*Compatible with Zodiac Heaters
*Compatible with Jandy Heaters
*Compatible with Legacy Heaters
*Compatible with LRZE Heaters
*Compatible with LRZM Heaters
*Spa Heaters
*Compatible models 125 175 250 325 400

Compatibility: Jandy LRZE Heaters, Jandy LRZM Heaters, Jandy LXi Heaters, Jandy JXi Heaters (Model 200, 260, 400).
Replaces Part Number: R0456500, 6204-209, 47-295-1172, JDYR0456500, LAR-151-4809

Cross References

The Details of R0456500 Regular 3.5M Hot Tub Temperature Probe Thermistor Sensor 20KOHM Replacement Compatible with Jandy Zodiac Legacy LXi Pool Spa Heaters

Product Name	R0456500 Thermistor Temperature Sensor for Pool Spa Heaters
Fit	Zodiac R0456500
Parts Included	Sleeve And Gasket
Shape	Tube Type
Housing Material	Tube Type, Plastic Material
Wire Length	3.5 Meter
Wire Color	Black
Replace Part Number	R0456500, 6204-209, 47-295-1172, JDYR0456500, LAR-151-4809
Accuracy	High
Certification	ROHS
Application	Swimming Pool Spa Heater

Pool & Spa Sensing Solutions
Reliable and accurate temperature sensing measurement is critical to efficient operation of the heating and filtration systems associated with pools and spas.
From Ampfort Sensors, Thermometrics provides an array of sensing products for swimming pool and spa applications. All of which include our world-renowned NTC Thermistors, providing high accuracy and stability, setting the performance standard in the industry.

Testing Spa Temperature Sensors
Shut off all power to the spa at the breaker and spa pack
Set your Ohm meter to the 20K setting
Locate the wire ends and remove the plug from the board
Place your meter leads onto the green and red wire
Compare readings to Thermistor Resistance vs. Temperature Chart
Most spa and hot tub high limits, aka thermistors, thermal cut-offs and temperature sensors - will have a resistance reading of around 10000 at 77 degrees Fahrenheit. Colder water produces higher readings up to 50K, while warmer 100° F water will produce lower readings. Refer to your spa manufacturer resistance vs. temperature chart. Or, if you get "0", or a zero reading, the sensor or cable is likely bad. Many hot tubs have more than one temperature sensor; a heater sensor, water temp sensor and air temp sensor.

Notice
*Please check the user manual for your heater to ensure R0456500 is listed as the part number for the temperature sensor/thermistor
*An easy indicator that your sensor may have gone bad is if the display temperature is much higher than normal
*Make sure the power is off before you replace thenew thermistor
*Easy to replace, Replacing the water temp sensor took about ten minutes and it works fine. A plier or adjustable wrench and a small (about 2 mm ) flat head screw driver

The Product Size of R0456500 Regular 3.5M Hot Tub Temperature Probe Thermistor Sensor 20KOHM Replacement Compatible with Jandy Zodiac Legacy LXi Pool Spa Heaters

 

The Feature of R0456500 Regular 3.5M Hot Tub Temperature Probe Thermistor Sensor 20KOHM Replacement Compatible with Jandy Zodiac Legacy LXi Pool Spa Heaters

1. High-Quality Manufacturing: High quality durable wire, made tolastlonger. This R0456500 temperature sensor kit includes sleeve and gasket. It's made of high quality materials, advanced technology and strict quality control ensure that the products have premium quality and longer service life. Distinct thread lines with no sharp edges to ensure a perfect fit.

2. Best Value: This R0456500 temp sensor is compatible with R0456500 Pool and Spa Heaters.
3. R0456500: Genuine pool thermometer temperature sensor Replacement Parts are parts that have been tested extensively to meet quality and compatibility standards.

4. Easy to Install: This R0456500 temp sensor is in multiple packaging, with few parts, this sensor is easy to install and provides accurate temperature readings.we put all the parts together to build the kit in-house but use all genuine parts.

5. After-sales Guarantee: All products of have quality guarantee. We offer a 12 month warranty at no additional cost.100% function testing after finish production; 100% function testing before shipping We will provide a 6-month replacement or refund guarantee. If You have any questions about our products, please contact us as soon as possible, We will definitely provide you with a perfect answer.

Application

Thermistor sensor can control the heater to heat the swimming pool water, maintain the water temperature and control it at the right temperature.